18 m² terrace slab, 12 cm
Concrete, bags and reinforcement allowance
2.38 m³ including 10% allowanceOpen the detailed example →BUILD MEASURE HELPER · PROJECT LIBRARY
Start from a real project, understand every assumption and open the calculator with the project already filled in.
Concrete, bags and reinforcement allowance
2.38 m³ including 10% allowanceOpen the detailed example →Vehicle-bearing reinforced slab
4.13 m³ including allowanceOpen the detailed example →Walls, two coats and primer
About 7–9 L depending on openingsOpen the detailed example →Two coats on a smooth ceiling
4.4 L with 10% allowanceOpen the detailed example →Straight layout, packs, underlay and skirting
21.4 m² to order at 7% wasteOpen the detailed example →Tiles, adhesive, grout and waterproofing
Wet-area system with 15% cutting allowanceOpen the detailed example →Standard roll with 53 cm pattern repeat
Drops and rolls rounded for pattern matchingOpen the detailed example →Two 100 mm crossed mineral-wool layers
R ≈ 5.4 m²K/W plus vapour layerOpen the detailed example →Concrete tiles, membrane, battens and gutters
Actual slope area, tiles and full accessoriesOpen the detailed example →One door, blocks, mortar, ties and DPC
Complete masonry purchase listOpen the detailed example →Pavers, bedding sand, base and edging
Complete layered paving systemOpen the detailed example →Boards, joists, posts and fixings
Structure and decking shopping listOpen the detailed example →Posts, bays, rails and concrete
Complete fence material listOpen the detailed example →Risers, treads, run and stringers
Code-oriented stair geometryOpen the detailed example →Foundation concrete, bag yield and ready-mix comparison
1.58 m³ including 10% allowanceOpen the detailed example →Compacted gravel, loose delivery weight and bag comparison
Compacted volume plus delivery and moisture allowancesOpen the detailed example →600 × 600 mm porcelain tiles, adhesive and grout
Straight layout with 10% cutting allowanceOpen the detailed example →Pattern waste, packs, underlay and skirting
27.6 m² to order with 15% pattern wasteOpen the detailed example →Straight layout, 900×450 mm porcelain tiles
40 tiles with 8% cutting allowanceOpen the detailed example →Straight layout, underlay and skirting included
5 packs at 2.5 m² each with 7% wasteOpen the detailed example →No pattern repeat, standard 10.05 m rolls
6 rolls for a 2.7 m finished heightOpen the detailed example →Finish-coat skim only, no base coat
2 finish bags and 1 primer canOpen the detailed example →Exterior one-coat render, no separate finish
8 base-coat bags with 10% wasteOpen the detailed example →Single layer, fixed directly to existing joists
7 sheets with 10% wasteOpen the detailed example →Sound-rated double layer, one door opening
10 sheets and 18 studs with 10% wasteOpen the detailed example →Single 100 mm layer, standard batts
4 packs at R ≈ 2.9 m²K/WOpen the detailed example →Light-duty base slab, 10 cm depth
0.86 m³ including 8% allowanceOpen the detailed example →Low boundary wall, EU brick, DPC included
222 bricks with 8% wasteOpen the detailed example →Concrete tiles, low pitch, full accessories
180 tiles for the sloped area with 10% wasteOpen the detailed example →Compact deck, boards only, ground-level frame
15 boards of 3.6 m with 8% wasteOpen the detailed example →Short run, four posts, two rails
4 bays and 5 posts with 5% wasteOpen the detailed example →Steep compact stair, narrow width
13 equal risers of 200 mmOpen the detailed example →Narrow path, square pavers, light bedding
114 pavers with 6% wasteOpen the detailed example →Soakaway and drainage trench backfill
Compacted volume with delivery allowanceOpen the detailed example →Thin surface layer over a weed membrane
Loose light gravel volume and bag comparisonOpen the detailed example →Thin compacted bedding layer under pavers
Compacted bedding volume with delivery weightOpen the detailed example →Bulk sand for mortar mixing on site
2 m³ before waste and moisture allowanceOpen the detailed example →Washed, rounded play-grade sand
Weight and bag count for a shallow fillOpen the detailed example →10 cm depth with settling allowance
Loose delivered volume above the finished depthOpen the detailed example →Deep planting bed, looser soil mix
Fill volume for a 30 cm deep bedOpen the detailed example →Thin levelling layer over an uneven area
Shallow-depth volume with waste and settlingOpen the detailed example →Standard bark mulch, weed suppression depth
Low-density volume and bag countOpen the detailed example →Deeper safety-fall depth under play equipment
Higher depth increases volume significantlyOpen the detailed example →Thin annual top-up over existing mulch
Small top-up volume, single bag likelyOpen the detailed example →Perimeter trench footing, bulking allowance
Bank volume plus 25% bulking for haul-awayOpen the detailed example →Uniform 1 m depth basin
Spoil volume including bulking for disposalOpen the detailed example →Standard sub-base depth before paving
Removed volume for a 25 cm sub-base digOpen the detailed example →Two rectangles combined into one total area
32 m² combined floor areaOpen the detailed example →One zone with a subtracted circular exclusion
Net lawn area after the flower bed is excludedOpen the detailed example →Two independent rectangular roof footprints
68 m² combined plan area before slope correctionOpen the detailed example →Shallow shelf and deeper centre zone
2.7 m³ combined liner volumeOpen the detailed example →Single zone, fixed depth planter
0.86 m³ of growing medium neededOpen the detailed example →Two-zone pool with different depths
54.4 m³ combined water volumeOpen the detailed example →Walls and ceiling, two coats, openings and colour change
Paint and primer tins rounded to purchase sizesOpen the detailed example →Wide pattern repeat, full drops, one spare roll and paste
Pattern-rounded drop plan and complete rollsOpen the detailed example →Primer, reinforced base coat, mesh laps and silicone finish
Separate rounded purchase quantities for every coatOpen the detailed example →Mineral wool boards, thermal resistance, fixings and vapour control
Pack count for 140 mm insulation with 10% wasteOpen the detailed example →Steel sheets, overlaps, membrane, battens and gutter
Slope-corrected sheet count and roof accessoriesOpen the detailed example →Metric bricks, mortar, courses, coping allowance and DPC
Rounded brick, mortar and DPC purchase listOpen the detailed example →Boards, studs, tracks, screws, tape and joint compound
Complete rounded drywall purchase scheduleOpen the detailed example →Heavy-duty pavers, deeper sub-base, bedding layer and edges
Pavers plus loose bedding and sub-base delivery volumesOpen the detailed example →Deck boards, structural frame, posts, footings, fixings and guard rail
Full structural and surface shopping listOpen the detailed example →Close-board pickets, three rails, posts, concrete and fixings
Bay layout and complete fence material quantitiesOpen the detailed example →Equal risers, comfortable going, stringers, treads and handrail option
Compact stair geometry and timber quantitiesOpen the detailed example →Start from a real project, understand every assumption and open the calculator with the project already filled in.
All calculators →